Operation37
Starting the Fireplace for the First Time
•Burn the heater at a high setting with the blower off for an extended period (up to 48 hours). This will cure the painted surfaces. Fumes from the paint curing and oil burning off the steel will occur. This is normal. We recommend opening a window to vent the room.
•Condensation may appear on the glass each time you start the fireplace - this is normal.
•Blue Flames will occur on the fireplace when it first comes on. After fifteen minutes the flames will turn a more realistic yellow and orange color.
•Certain installations use a remote "wall switch" to turn the fireplace on and off. If this is the case, leave the ON/OFF switch "ON".
Turning the Fireplace On and Off
After the pilot has been started...
O |
|
N |
|
O |
|
F | F |
|
Use this switch to turn the main burner on and off manually.
See the instructions included with the remote for details on operation.
| °F |
°F |
|
TEMP | |
ROOM | OFF |
See the instructions | o |
A | |
| t |
| u |
included with the |
|
remote for changing |
|
the battery. |
|
For systems with wall thermostats, use this switch to control the temperature (right is hotter, left cooler). Some systems require the on/off switch to be on.
•Do not place any combustible items on top of or directly in front of the fireplace, even temporarily. The optional thermostat may start the fireplace causing a combustible item to ignite.
•If the fireplace turns on and off frequently while using the thermostat, you may want to adjust the flame height down until it produces just enough heat needed.
Adjusting the Flame Height
•Your fireplace has an adjustable flame to tailor the look and heat output to your specific needs. It is adjusted by turning the middle dial on the gas control valve.
Flame Height Adjustment Knob
Index Mark
Turn
© Travis Industries | 4040830 |
