![Optional Equipment (for qualified installers only)](/images/new-backgrounds/46285/4628591x1.webp)
46 | Optional Equipment (for qualified installers only) |
3 Follow the directions below to replace the orifice.
a
Slide the air shutter all the way to the left.
Burner Orifice
Manifold
d
Use a 1/2” open end wrench to unscrew the burner orifice.
1/2" Wrench
NOTE:
Screw the LP orifice in
5/16” so the orifice shoulder protrudes 5/16”
(indicating full insertion).
The new LP orifice | ||
has “56” stamped | ||
on it. | e | |
| ||
| Apply thread | |
56 | sealant to the | |
new orifice and | ||
| ||
| install. | |
49 | The old NG | |
orifice has “49” | ||
|
stamped on it.
4Remove the pilot orifice following the instructions below. Replace with the propane pilot orifice
a | Lift the pilot hood | |
off the pilot | ||
| ||
| assembly. |
c | Remove the orifice and replace with the LP orifice. Screw the | |
orifice all the way in and replace the pilot hood. | ||
| ||
| Orifice Identification: |
b Use a hex wrench to unscrew the orifice.
5/32" Hex
NOTE: when
35
LP (Propane) Orifice
35
NG (Natural Gas) Orifice
62
© Travis Industries | 4040830 |