4. Installation
4.2 Lens installationHow to install ?
1. Take the lens out of its packing material
2. Fix the lens by placing it in the housing
Image4-3
Note: Incase of a motorized lens the female jack must be in front of the male jack located in the upper-left part of the housing
in the projector
3. Push carefully to lock the lens in the housing
4.3 Removing the lensHow to remove the lens ?
1. Unlock the lens by pulling the handle located on the right side of the projector
Image4-4
Image4-5
locationof the lens handle
2. Remove the lens out of its housing
CAUTION:Never transport the projector with the lens mounted on it !
Always remove the lens before transporting the projector.
R5976992 ICONH250/400 13/12/2006 13