oThe cable connections must be in accordance with the diagram located on the bottom of the hob (see above).
oYou should use a good quality screwdriver to carefully, fully tighten ALL of the terminal screws.
oIf when the hob is first switched on, only two of the zones work, you should recheck that the terminal screws are all fully tightened. This should be done before contacting the Customer Care Department.
oIMPORTANT: The appliance must NOT be connected to the mains supply by means of a 13A plug and socket.
oThe cable can be looped if necessary, but make sure that is not kinked or trapped when the hob is in position. Care must be taken to avoid the cable being in contact with hot parts of the appliance.
22
