04. November | 2008 | 08:50 |
Tuesday |
|
|
|
| Menu Button |
|
Easy Menu |
| Dial Knob |
|
Button |
|
| |
|
|
| |
STEP 1 |
|
|
|
The basic display is shown. |
|
| |
If the basic display is not |
|
| |
showing, press the MENU |
|
| |
button. | until the |
|
|
basic display is shown | 04. November 2008 | 08:50 | |
Tuesday |
| ||
|
|
| |
STEP 2 |
Press the MENU button. |
Information |
Set time and date |
STEP 3
Turn the Dial Knob clockwise to highlight ‘Temps / mode CH1’.
Holidays heating CH1
Temps / mode CH1
Temps / mode hot water
STEP 4 - For this example choose Comfort
Press the Dial Knob twice and |
|
then turn the Dial Knob to the |
|
required space heating mode i.e. |
|
On or Timed or Reduced or |
|
Protection. Press the Dial Knob | Temps / mode CH1 |
to select. | Operating mode |
On | |
| |
STEP 5 |
|
Turn the Dial Knob until ‘Room |
|
temperature CH1’ is displayed. |
|
Press the Dial Knob and the °C |
|
will flash, turn the Dial to set the |
|
required °C and then press the | Temps / mode CH1 |
Dial Knob to select.. | Room temperature CH1 |
18.0 °C | |
| |
STEP 6 |
|
The Process for setting the |
|
Reduced setpoint is the same. |
|
When STEP 4 is reached |
|
choose Reduced and then |
|
continue with STEP 5 but turn | Temps / mode CH1 |
Dial to ‘Reduced setpoint’. | Reduced setpoint |
10.0 °C | |
|
© Baxi Heating UK Ltd 2010
7.0 Mode Selection/Temp Adjustment
7.1Selecting the Cental Heating Mode
1.There are 4 central heating modes: -
On | - heating operates to keep the dwelling at |
| the comfort set point chosen by the |
| householder continuously ie. 24hr/day, |
| initially set at 20°C. |
Timed | - heating operates to keep the dwelling at |
| the comfort set point chosen by the |
| householder according to the |
| programme times, initially set at 20°C |
| (min 10°C - max 35°C). |
Reduced | - heating operates to keep the dwelling at |
| the reduced set point chosen by the |
| householder continuously, initially set at |
| 5°C (min 5°C - max 20°C). |
Protection | - heating operates to keep the dwelling |
| above 5°C continuously. |
2.The central heating mode can be set using either the POU on the appliance or the room unit PRU.
3.To select the mode required: - from the main screen press the menu button.
4.Turn Dial to ‘Temps / mode CH1’.
Press dial to select and scroll between: - Protection – Timed – Reduced – On, press dial to select.
7.2Further Information
1.The user must be aware that in the automatic mode the programmer is not inactive in between the programmed times, the frost protection/reduced temperature period is constantly in the background and will cause the appliance to come on if the room temperature falls below the reduced temperature setpoint (5° default) or 5°C during frost protection.
NOTE: Adjustment of the room temperature during these periods will result in a temporary change to the reduced temperature setting until the next comfort period is activated.
2.The central heating may be switched on at any time by increasing the room temperature setpoint to a greater value than the indicated room temperature whether in or out of a programmed period. This setpoint change will remain active until the next programmed comfort period when the setpoint will revert to the permanent comfort setpoint.
11
