1.0 Quick Reference Guide
The Easy menu button
Programmable Operator Unit (POU)
24 hour time bar for central heating and domestic hot water - shows active programme times
- Default 6am - 9am, 11am - 12pm & 15pm - 22pm
04. November | 2008 | 08:50 |
Tuesday |
|
|
Commonly required functions are available more quickly via the easy menu button. To access, press the easy menu button and scroll through confirm your selection by pressing the dial button.
Commonly required functions are shown in order below: -
1.Standby/operation - the on/off switch - in the off mode frost protection for the appliance is active: displays 
when in standby.
2.Hot water boost - The domestic hot water is heated to the required temperature once.
3.Central heating mode CH1 - easy access to change the operating mode see Section 7.1
Easy Menu
Button
Standby
Menu Button
4.Room temperature CH1 - The central heating setpoint temperature can be altered permanently.
5.Hot water mode - easy access to change the operating mode see Section 7.4
6.Hot water temp setpoint - The hot water setpoint temperature can be altered permanently as long as a tank sensor is fitted. If no sensor is fitted
Dial Knob (Turn /Push Select)
Display Descriptions
Burner in Operation 1 - Engine 2 - Supplementary
Heating to the Room temperature Set Point
Heating to the Reduced Set Point
Central Heating Times Active
DHW Time Active
Combustion Check Function Active
Holiday Function Active
Text 1 |
Text 2 |
Text 3 |
Manual Overide
Time Switch Function Active
Communication between POU & PCB Control Established
POU Programmed as Room Unit
Error Message
Standby - Appliance ON/OFF
Outdoor Sensor Connected
System / Appliance Attention Required
Maintenance / Special Mode
Change Battery (only if radio control fitted)
Display showing all available segments
© Baxi Heating UK Ltd 2010 | 3 |
