Reset
1.0 Quick Reference Guide
2 | 1 | 12 |
| ||
3 |
| 11 |
|
| 4 |
|
| 10 |
2 |
| 5 |
|
| 9 |
1 | 3 | PM |
|
| 8 |
7 |
|
| |||
|
|
|
|
| 7 |
0 | 4 | 8 |
|
| AM |
|
| 0 | 5 | ||
bar |
| 9 |
| ||
|
|
|
| ||
| 10 |
|
| 4 | |
|
|
|
| ||
|
| 11 |
| 3 |
|
|
| 12 | 1 | 2 |
|
ON/OFF/Reset | Display | Central Heating | Domestic Hot Water | System Pressure Gauge | Integral Timer |
Selector Switch |
| Temperature Control | Temperature Control |
|
|
Reset | Reset | Reset | Reset |
OFF Position | Central Heating & Hot Water | Domestic Hot Water | Reset |
The boiler will not operate. | Both Heating & Hot Water will operate. | Hot Water will operate. | Hold for approx 5 seconds and release. |
Display
2
13 
04
bar
Central Heating Indicator - The indicator will illuminate when the boiler is in the central heating mode.
Domestic Hot Water Indicator - The indicator will illuminate when hot water is being supplied to a tap or shower.
Burner On Indicator - The indicator will illuminate when the burner has fired and is heating your central heating or domestic hot water.
Boiler Output Temperature - In either the central heating or domestic hot water position the display will illuminate showing the current boiler temperature in degrees centigrade.
Central Heating Temperature Control
Turn the knob clockwise to increase or anticlockwise to decrease the temperature. Range 25 - 80° C.
Domestic Hot Water Temperature Control
Turn the knob clockwise to increase or anticlockwise to decrease the temperature. Range 35 - 60° C.
Central Heating System Pressure - The normal operating water pressure is shown when the needle is in the GREEN section of the gauge, between 1 and 2.5 bar. If the pressure exceeds 3 bar (needle in the RED section) the safety pressure valve will operate and a fault is indicated. Contact your Installer.
© Baxi Heating UK Ltd 2012 | 3 |
