DS74 Serial I/O Module
Select 5), to get the Parity, Default is None the Host module responds:
Select parity: 1 For None 2 For Even 3 For Odd Enter Request :
Type a number to select the Parity option and press <cr>.
RTS/DTR Line Driver Inactivity State
RTS (Request to Send)/ DTR (Data Terminal Ready) is normally used in conjunction with an external modem. With no modem the RTS and DTS default state is High.
Select 6), from the Serial Port Configuration the Host Module responds:
RTS Line Driver Inactive State is: High
High ? (Y/N, CR for no change):
Select 7), from the Serial Port Configuration the Host Module responds:
DTR Line Driver Inactive State is: High
High ? (Y/N, CR for no change):
Type ‘Y’ for YES or ‘N’ for NO and press <cr>.
NOTE: Once you make a change to the Serial Port Configuration options, you have to back out of the menu and will be asked to Accept changes. If you type ‘y’ for yes, the changes take effect immediately for the serial port.
Accept changes ? (Y/N) :y
Type ‘Y’ for YES or ‘N’ for NO and press <cr>.
Changes accepted.
Port Device Name
Select the port you want to rename, followed by a <cr>. Type the name you want to identify the port.
Enter Serial Port Number (? = Help, ENTER = Exit) :1
The unit displays the current port configuration.
10
