DS74 Serial I/O Module
Unit Configuration Menu
The configuration menu allows the user to choose which unit they would like to access. Enter the number that corresponds with the Host Module followed by a <cr>. Now the module can be configured as shown. This menu is where you will be able to edit any of the information listed below. The following pages define each line of the configuration menu.
Configuration | module #1 | 1 | |
DS62 | |||
DS74 | module | #2 | 2 |
module | #5 | 3 | |
Enter Request : |
|
|
|
NOTE: The DS74 I/O peripheral configuration is save to the host module.
DS74 Configuration Menu
Copyright(C) Bay Technical Associates 2005
Data Switch Series -
Module 2
Status | 1 | |
Serial Port | Configuration | 2 |
Port Device | Name | 3 |
Port Device | Type | 4 |
Exit | X,CR | |
Enter Request : |
| |
IMPORTANT: Once you make a change to any of the Configuration options, you have to back out of the Configuration menu and will be asked to ‘Accept changes’. If you type ‘Y’ for YES, the changes take effect immediately for the serial port.
Accept changes ? (Y/N) :y
Changes accepted.
6
