Maxtor 16Channel Stand Alone DVR manual Camera Active Setup Motion Configuration

					CHAP. 5	Set Up
		CAMERA ACTIVE SETUP			MOTION CONFIGURATION
	CH	STATUS	LIVE	REC	CHANNEL	01
	---------------------------------------------------------------------------				SENSITIVITY GRADE	01
01		ACTIVE	ON	ON
					MOTION DISPLAY TYPE	OFF
02		ACTIVE	ON	ON
03		LOSS	OFF	OFF	RECORD DURATION	05 SEC
04		ACTIVE	ON	OFF
05		ACTIVE	ON	ON	NUMBER OF CELL OT DETECT	02
06		ACTIVE	ON	ON
07		ACTIVE	ON	ON
08		ACTIVE	ON	ON

SELECT ▲▼, CHANGE VALUE : + -

SELECT : ▲▼ ◀▶, & [ENTER]

(3)CAMERA ACTIVE SETUP : With direction button, move to option to be changed, and press [ENTER] button to select [ON/OFF]. If it is set at LIVE [OFF] and REC [ON], DVR system records, but does not show live image of set channel.

-STATUS : Shows if image from a specific channel is coming for live display and recording. In normal camera condition, it is ACTIVE, but LOSS is displayed when the cable is disconnected or camera is not working.

-LIVE : Decides whether to show LIVE screen image or not.

-REC : Decides whether to record relevant channel or not.

(4)MOTION SETUP: You can set sensitive of motion detection in 4 steps, motion detection area and others in relation to motion recording in this menu.

(4)-1. MOTION CONFIGURATION

-SENSITIVITY GRADE : Adjusts motion detection sensitivity. (LOW, MEDIUM, HIGH, VERY HIGH)

-MOTION DISPLAY TYPE : Showing cells with motion detected differently from cells with no motion .

-RECORD DURATION : Whenever motion is detected and it is set at Motion Recording mode, DVR system records for RECORD DURATION from time motion is detected. (1sec. ~ 99 sec.) (Default duration : 5 sec.)

(4)-2. MOTION MASK SETUP: Set motion detection area. Direction button is for moving and [ENTER] button is for selection, and [MODE] button is for changing mode of MASK SETUP.

-CELL : Move to the location which you want to detect and then press the [ENTER] button. Highlighted cell area means motion detection area.

-ALL ON : Set all cells as detection area. Use [ENTER] button to set.

-ALL OFF : Set all cells as no-detection area. Use [ENTER] button to set.

-BLOCK ON : Select detection area by block. Use [MODE] button and press [ENTER] button to set ON.

-BLOCK OFF : Select un-detection area by block. Use [MODE] button and press [ENTER] button to set ON.

Highlighted Area

(Motion Detection Area)

Non-highlighted Area

(No Motion Detection Area)

24