Bayer HealthCare 2 manual Push Out Test Strip

Then insert the lancet firmly until it comes to a full stop. This will “cock” the device.

4.Twist off the lancet cap and replace the endcap.

Push Out Test Strip

5.Your Breeze Meter uses a special, easy-to-use “Pull and Push” design.

Here’s how it works:

Hold the meter comfortably in one hand. Firmly grasp the meter handle with the other hand (shown here). Now, just “Pull and Push”—“Pull” the handle out until it stops and “Push” it back in until it stops again.

Helpful Hint: There is no need to turn the meter on— just “Pull and Push.”

www.ascensia.ca