ENGLISH
SPEAKER CONNECTIONS
Make the speaker connections using speaker wire that is at least 12 gauge or heavier.
As with any audio component, proper phasing of the amplifier and speakers is essential for strong bass response. When connecting, make sure that positive (+) from the amplifier is connected to the positive (+) of the speaker, and the same for negative
1 | CHIL | +12V |
MIN |
| FUSE 30A X 4 |
2 Ohm
(1 Ohm Minimum)
+-
1 | CHIL |
MIN |
|
+12V
FUSE 30A X 4
2 Ohm
(1 Ohm Minimum)
+ | - |
+ | - |
Dual 4 Ohm Woofer
*2 Ohm load recommended for best efficiency
and to optimize the power output.
CAUTION! The amplifiers must see a 1 Ohm load or higher for the subwoofer(s). Any lower than the above mentioned impedance will cause the amplifiers to overheat and possibly cause permanent damage to the amplifiers.
11
