![](/images/new-backgrounds/1001185/118527x1.webp)
® | OPERATION |
you back, simply hit EXIT and start again.
Where an additional "ENTER" press is required to write the selection to memory, the screen will prompt you with "[ENTER] to Confirm".
The LED display also offers some hints. Left or right arrows on the top line indicate the BACK/NEXT buttons will step to other choices.
7.2SUBMENUS
7.2.1.1Crossover Submenu
This menu selects the type of crossover and is the primary submenu to create, recall, delete, and name a program configuration.
Press MENU and ENTER to access this submenu. Then use the BACK, NEXT and ENTER buttons to adjust the Xover Submenu. Submenu items include:
7.2.1.2Load a Xover:
This will load a configuration that has already been saved into the memory of the unit. Until you have saved other programs into the unit, only the default value will be available.
7.2.1.3Design a Xover;
Use this mode to select a different type of crossover and set the parameters. Parameters include mode type, stereo connect control, input channel adjust- ment.
7.2.1.4Store a Xover:
Store all the configuration settings of a
7.2.1.5Erase a Xover:
This will delete a stored mode.
7.3Security Submenu
This menu allows you lockout various combinations of any or all front panel programming functions. A
8