Techno Tidbits and
Symptom | Cause | Remedy |
|
|
|
Video |
|
|
No image is output when a | • Improper connections. | • Make sure the component is con- |
function is selected. |
| nected correctly (see pages 16 and 17). |
| • The input source is not properly | • Press the correct function button. |
|
| |
| selected. | • Please read the TV monitor manual |
| • The video input selected on the TV moni- | and change the settings accordingly. |
| tor is incorrect. | • Use the same cable to connect to your |
| • The TV or monitor is hooked up with cord | TV and all your video equipment (see |
| that is different than that used for the | pages 16 and 17). |
| video player. | • Select the correct COMPONENT IN |
| • The component video setting is incor- | SELECT setting (see page 82). |
| rect. | • Turn |
| • The |
|
|
| |
|
|
|
There is no image coming | • The type of cord connected to the TV | • Change the settings to match the cord |
from the selected component | doesn't match your video input settings. | connected (see page 16). |
video jacks. |
|
|
|
|
|
Can't record video. | • The source is copy protected. |
| • You are trying to record a source con- |
| nected to the component video jacks. |
| • The recorder's video input is hooked up |
| using a different type of cord to the |
| source video output. |
•You can't record sources that have been copy protected.
•Connect the component with S video or composite video cords (see pages 16 and 17).
•Hook up the source and the recorder using the same type of video cord. (see page 17)
Input/display
The display is dark.• The display DIMMER button is pushed. • Press DIMMER on the remote control repeatedly to return to the default set- ting (see page 56).
You can't get DIGITAL to come up when using the SIGNAL SELECT button.
•Either the digital connections or the DIG- ITAL IN SELECT is incorrect.
•MULTI CH IN mode is on.
•Make sure the digital connections (see pages 17 and 22) and the DIGITAL IN SELECT (see page 81) are done cor- rectly.
•Turn MULTI CH IN mode off (see page 53).
The digital format indicator doesn't light up even when playing a
•The player is paused or stopped.
•There is a mistake in the player settings for audio output.
•Play the source.
•Fix the audio settings (check the man- ual that came with your DVD player).
A compressed digital source is being played, but the digital format indicators don't light up.
•Although it's a
•There is no problem. The indicator won't light when the track is not a com- pressed digital source.
During playback of a compressed digital source, the PRO LOGIC II or NEO:6 indicators show in the display.
•The digital signal is not being sent with the source.
•The audio is in two channel format.
•It has already been Dolby surround encoded.
•Choose DIGITAL or AUTO with the sig- nal select button (see page 44).
•This is not a malfunction. Check the manufacturer information for the source.
During playback of a Surround EX or DTS ES source on the AUTO setting, the EX and ES indicators won't light.
•The source may be 6.1 playback compat- ible, but there is no signal from the source to indicate this.
•Switch the SB CH MODE to ON (see page 54).
During playback of a DVD audio source, the player shows a transfer rate of 96kHz, but the receiver does not.
•The multichannel connections are ana- log, so there is no digital transfer.
•This is not a malfunction. See the player's manual for more details.
