Displays& Controlsand Controls
nd Controls
Front Panel
All the controls on the front panel are explained and/or referenced here. To open the front panel push gently on the lower third of the panel.
1MULTI JOG dial
You can use this dial for many purposes. When you press the SET UP button (12), you can use it to perform SYSTEM SETUP operations; select a function or a listening mode or do TUNER EDIT functions (in TUNER mode).
2STANDBY/ON button
Press to switch the receiver ON or into STANDBY mode.
3Listening mode buttons (page 45)
There are two types of SURROUND modes: MOVIE: Press to put the receiver into MOVIE mode (see page 46).
MUSIC: Press to put the receiver into MUSIC mode (see page 47).
STEREO/DIRECT (see page 45): Switches the receiver into STEREO mode if it was in a different sound mode or toggles between DIRECT and STEREO mode.
4ENTER button
Use this button to enter information concerning the SYSTEM SETUP, listening mode or the tuner.
5STANDBY indicator
Lights when the receiver is in STANDBY mode. (Please note that this receiver consumes a small amount of power [0.8 W] in the standby mode.)
6Remote sensor
Receives the signals from the remote control.
7Display (See page 33)
8MCACC indicator (see pages 13 and 49)
Lights when the ACOUSTIC CAL EQ is on. (After the Auto Surround Sound Setup has been completed the ACOUSTIC CAL EQ is set on and this display will light.)
9MULTI CH IN button
Use this button to select the component you have hooked up to the MULTI CH IN terminals (for example, a
28
