Pioneer VSX-53TX manual 2 3,5, Naming Memorized Stations, Using the Tuner

Using the Tuner

Naming Memorized Stations

You can input a name of up to four characters for each preset station in the receiver’s memory (see the previous page). This name can be anything you choose. For example, you could input JAZZ for that station and when you listen to it the name, rather than the frequency number, will appear on your display.

1,5 5,6 2 3,5 4

1Press the TUNER button on the remote control.

2Press CLASS repeatedly to select the class.

Repeatedly pressing this button cycles through the three available classes, A, B and C.

3Press ST + or ST – to select the preset channel.

4Press TUNER EDIT to select the station name mode.

5 Enter the station name you want.

Names can be up to four characters long.

•Use the MULTI JOG dial (front panel) or the ST +/– but- tons (remote) to select characters.

•Press ENTER to confirm a character. If no character is input, a space is input.

To erase a station name, simply repeat steps 1-4 and input four spaces instead of a name.

The possible selections are shown below.

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 0123456789 !”#$%&’()*+,–./:;<=>?@[ \ ]ˆ_{} [space]

6Press ENTER when you have got the characters you want to enter.

Repeat steps 2 to 5 to memorize up to 30 preset broadcast station names.

Memo:

To change a station name, enter a new name over the top of the existing one.

60