Pioneer VSX-53TX manual Use the  buttons to select Multi, ROOM. Press Enter, It. Press Enter

		Using Other Functions
MULTI ROOM setup
	1	Turn on the receiver, your TV and
		press RECEIVER on the remote con-
		trol.
		Make sure your TV is set to the receiver.
	2	Press the SYSTEM SETUP button.
		The SYSTEM SETUP menu appears on the OSD.
	3	Use the  buttons to select MULTI
		ROOM. Press ENTER.
3	4	VOLUME LEVEL should be selected (if
		it isn't use the  buttons to select
		it). Press ENTER.
		Use the  buttons to select the VOLUME LEVEL,
		VARIABLE or FIXED. Press ENTER.
		If you hook up a just a power amplifier in the sub room the
4		VSX-53TX will act as a pre-amp. In this case choose
		VARIABLE. If you hook up a full integrated amplifier in the
		sub room (such as another Pioneer VSX receiver) choose
VARIABLE		FIXED.

PIONEER

5

VARIABLE

OTHERS

6

VARIABLE

OTHERS

CAUTION!

If the MULTI ROOM is set to FIXED the volume on the main unit will be set to maximum. Thus, when output, it will be extremely loud. Please set the master volume controls of the integrated amplifier in the sub room very low at first and experiment to find the correct volume.

5IR RECEIVER should be selected (if it isn't use the  buttons to select it).

Press ENTER.

Use the  buttons to select the IR RECEIVER type, PIONEER or OTHERS. Press ENTER.

If you have an IR receiver from a different company than PIONEER, select OTHERS. However, if selecting OTHERS doesn’t seem to work, try selecting PIONEER.

Memo:

•There may be some IR receivers that can't be used with this receiver. Check with a PIONEER representative to be sure.

•If you selected MR&S in the SURRBACK SYSTEM setting on page 37 you won't be able to set the VOLUME LEVEL.

6Use the  buttons to select EXIT, then press ENTER to go back to the SYSTEM SETUP menu.

7Use the  buttons to select EXIT and press ENTER.

You will exit the SYSTEM SETUP menu and return to normal operation.

EXPERT

71