Using Other Functions
4 Repeat step 3 to input multi operations to the MULTI CONTROL button you pressed in step 3.
You can repeat this process for up to five commands.
For example: you could enter the following three operations using the preceding step 3.
1 Press the TV CONT button and TV to turn on your TV (as explained above).
2 Press the DVD/LD button then SOURCE to turn on your DVD player (if it is not a PIONEER product).
3 Press the DVD/LD button then (play) to start playing the DVD player.
When you employ multi operations (see below), these three tasks will be performed in the same order.
5 Press the REMOTE SETUP button to exit the multi operation setup mode.
The remote control return to their previous operation modes.
Performing Multi Operations
Do the following to use the multi operations.
1 Press the MULTI OPERATION button.
2 Press the MULTI CONTROL button for the component that has been set up with multi operations.
The power of the receiver (and any Pioneer components use in the program) goes on and the programmed multi operations are performed automatically.
76
