Pioneer VSX-53TX manual Setting up the Main Unit, Assigning the Digital Inputs

Easy Setup Guide Part 1

3 Setting up the Main Unit

1 Plug the AC power cord into a wall outlet.

2 Press the  STANDBY/ON button to switch the receiver ON.

4 Assigning the Digital Inputs

This is only necessary if you did not hook up your DVD player to DIGITAL IN 3 using a coaxial cable but rather connected it to one of the optical digital inputs. The following example shows how to assign the DIGITAL IN 2 jack to DVD.

	1	Turn on the receiver and your TV,
		press the RECEIVER button on the
		remote control.
	2	Press the SYSTEM SETUP button.
		The SYSTEM SETUP menu appears on your TV (if it
		doesn't, refer to page 10 to make sure you have prop-
		erly connected the receiver to your TV).
	3	Looking at the on-screen display on
		your TV, use the  buttons to
3		select INPUT ASSIGN. Press the
		ENTER button.
	4	DIGITAL IN-SELECT should be
		selected, if not use the  buttons
		to select it. Press the ENTER button.
4	5	Use the  buttons to select
		DIGITAL-2 and press ENTER.
		The default setting for the DIGITAL-2 jack is CD-R.

6Use the  buttons to select DVD/

LD and press ENTER.

5
	7 Press the SYSTEM SETUP button.
	The receiver exits the setup process.

6

12