Displays and Controls
Display
All the display information is explained and/or referenced here.
1SIGNAL indicators
Light to indicate the input signal you selected. AUTO: Lights when the receiver is set to select the input signal automatically.
DIGITAL: Lights when digital audio signals are selected.
ANALOG: Lights when analog signals are selected.
2Digital format indicators
PRO LOGIC II: Lights during Dolby Pro Logic II processing.
NEO:6: Lights during NEO:6 processing.
2 DIGITAL: Lights when a Dolby Digital signal is detected.
DTS: Lights when a DTS signal is detected.
ES: Lights when playing back a DTS ES signal.
EX: Lights when playing back a Dolby Digital EX signal.
STEREO: Lights during
3LOUDNESS indicator
Lights when LOUDNESS is on.
4MIDNIGHT indicator
Lights when MIDNIGHT is on.
5TONE indicator
Lights when the TONE control is on.
6DNR indicator
Lights when DIGITAL NR is on.
7TUNER indicators
STEREO: Lights when an FM stereo broadcast is received in the auto stereo mode.
MONO: Lights when the tuner is set to receive FM broadcasts and when MPX mode is selected. TUNED: Lights when a broadcast is received.
8Volume level indicator
9
10Hi-BIT/SAMPLING indicator
Lights when a AUDIO SCALER mode is on.
11DSP indicators
MOVIE: Lights when a MOVIE mode is selected. When a DSP MOVIE mode is selected DSP will light with a box around it.
MUSIC: Lights when a MUSIC mode is selected. When a DSP MUSIC mode is selected DSP will light with a box around it.
12Speaker indicators (see page 68)
Lights to indicate the current speaker system, A and/or B.
13Program Format indicators
For Dolby Digital or DTS sources: These indicators change according to which channels are active in the source. When all three LS (left surround), S (surround) and RS (right surround) light at the same time it means a source with a 6.1 channel playback flag is being used.
L – Left front channel. C – Center channel.
R – Right front channel.
LS – Left surround channel.
S – Surround channel or Surround back channel. RS – Right surround channel.
LFE – Low Frequency Effects channel. O – Lights when LFE signal is input.
14 SB CH indicators (see page 54)
Light to indicate the status of the surround back channels.
AUTO – Lights when the SB CH MODE or virtual surround back mode is set to AUTO.
ON – Lights when the SB CH MODE or virtual surround back mode is set to ON.
OFF – Lights when the SB CH MODE or virtual surround back mode is set to OFF.
PREPARATION
33
Lights when the MULTI ROOM system is on.
