Pioneer VSX-53TX Controlling the Multi Room system from the sub room, Sub room source, Volume

Using Other Functions

Controlling the MULTI ROOM system from the sub room

RECEIVER		1	From the sub room, point the remote
			control at the IR Receiver and press a
			 STANDBY/ON button to turn on
MULTI			the MULTI ROOM system.
CONTROL	INPUT		The MULTI ROOM & SOURCE indicator lights on the front
			panel in the main room.
	MASTER	2	Press the INPUT button to select the
			sub room source.
	VOLUME +/–
ST –/+			You can also use a specific MULTI CONTROL button (for
			example, the DVD/LD button) for this purpose.
		3	Press VOLUME +/– to adjust the
	CLASS		volume.
			The following remote control buttons can be used to
Number			operate the receiver from the sub room.
			•	 RECEIVER button
button
			•	MULTI CONTROL button (will not select MD/TAPE2,
				VCR 2 or VIDEO)
			•	MASTER VOLUME +/– buttons (for adjusting the sub-
Memo:				room's volume level, but can't be used when set to
				FIXED)
• Make sure the system is in STANDBY mode
			•	CLASS button (for selecting the memory class you
or ON.
				want)
• When someone is controlling the system
			•	ST –/+button (for recalling memorized radio stations
from the main room you won't be able to
				(the tuner is selected automatically))
operate the remote room controls.			•	Number button (0~9)

•When you are doing the REMOTE SETUP process the MULTI ROOM cannot be used.

•If you use a PIONEER amplifier in the sub room, when you want to control the VSX-53TX only you will also change the settings in the sub room. To avoid this, cover up the remote sensor on the sub room amplifier.

Sub room Main room

IR Receiver EXPERT

73