Pioneer VSX-53TX manual Expert System Settings, EXPERT Setup

	Expert System Settings	Expert System Settings
EXPERT Setup

The settings here can only be done if you've performed the more basic preliminary setups. Thus, before doing these settings do either AUTO SETTING on page 13 or NORMAL setup page 38. These settings are to further heighten your surround sound. They are not absolutely necessary but may give more defined and enjoyable surround sound. You can decide if you want to make these settings or not. You only need to make these settings once (unless you change the placement of your current speaker system, add new speakers or components to your system, etc.). These setup operations use your TV to display the settings and choices so be sure your TV and receiver are properly hooked up.

	1	Turn on the receiver and your TV,
		press RECEIVER on the remote con-
		trol.
		Make sure your TV is set to the receiver.
	2	Press the SYSTEM SETUP button.
		The menu possibilities appear on your TV.
	3	SURROUND SETUP should be selected
3-5	2	(if it's not use the  buttons to
		select it). Press the ENTER button.
	4	Select EXPERT with the  buttons.
		Press the ENTER button.
	5	Follow the order below to make
		expert settings. Use the  buttons
		to navigate through the menus.
		When you have the setting you want
3		in particular menu, press ENTER.
		In each mode, the current settings are displayed on the
		screen.

	CROSSOVER NETWORK (page 86)
	This feature determines which frequencies will be sent to
	the subwoofer (or large speakers).
	FINE CHANNEL LEVEL (page 87)
	This feature balances the sound output level of your
4	speakers more finely than in the NORMAL setup.
	FINE CHANNEL DELAY (page 88)
	This feature adjusts the delay level of your speakers more
	finely than in the NORMAL setup.
	ACOUSTIC CAL EQ (page 89)
	This feature allows you to adjust the amount of a certain
	frequency in a soundtrack, acting as a kind of room
	equalizer for your speakers.
	BASS PEAK LEVEL (page 94)
	Dolby Digital and DTS audio sources include ultra-low
5	bass tones. Set the bass peak level as needed to prevent
	the ultra-low bass tones from distorting the sound from
	the speakers.
	D-RANGE CONTROL (page 95)	EXPERT
	This feature makes possible excellent surround sound
	effects when listening to Dolby Digital and DTS sources at
	low volumes.

85