Beacon Computer Lan Adapter manual Attaching the Antenna, Attaching the Snap-On Antenna

Installing the Hardware

Attaching the Antenna

CAUTION:The Snap-On antenna should never be placed in contact with metal surfaces while in use.

Attaching the Snap-On Antenna

NOTE: Wireless LAN Adapter Card comes with the antenna attached. If you need to change the antenna, the Adapter should be removed from the PC Card slot before removing or attaching an antenna.

1.Hold the antenna so the connector and guide pin leads line up with the connector and slots on the PC Card. The Aironet logo on the PC Card and on the Snap-On antenna should both be facing up.

2.Slide the leads on the antenna into the connectors until they snap into place.

Attaching a Remote Antenna

1.Line up the antenna cable leads with the connec- tors on the PC Card.

2.Slide the cable leads into the connectors until they snap into place.

2-5