Installing the Software
Windows for Workgroups NDIS2 Installation
1.Power on your computer and start Windows for Workgroups.
2.Go to the Network program group and click on Network
3.Under Network Setup, choose Networks.....
4.Under Networks choose Install Microsoft Windows Network. Select OK.
5.Under Network Setup, choose Drivers....
6.Under Network Drivers, choose Add Adapters.
7.If the drivers were already copied to the hard disk, they will be displayed in the list.
8.Under Add Adapter, choose the appropriate Aironet Adapter. If it is not on the menu list, choose Unlisted or Updated Network Driver. The Install Driver pop up window will ask you for the Aironet driver disk.
9.Place the driver disk in drive A.
10.Type A:\NDIS2\ at the prompt and press Enter.
11.Choose the correct Aironet Adapter and click OK.
12.If the chosen adapter is displayed in the Network Drivers, click on Setup.
13.Select the appropriate parameters, such as Infrastruc- ture Mode, SSID, Channel, and Bitrate.
14.Exit Windows for Workgroups.
15.To modify the PC Card system parameters, edit the PROTOCOL.INI file in the Windows directory.
16.Reboot your computer.
