Installing the Software
Windows 95 or Windows 98 NDIS3 Installation
To complete the installation of the PC Card under Windows 95 or Windows 98, make sure that the PC Card driver is installed and PC Card
NOTE: To find out more about PC Card and PC Card 32- bit support, follow the instructions found in the Windows 95 Help menu section titled Enabling
1.Power on your computer and boot Windows.
2.Insert the adapter into one of the PC Card slots.
3.Windows will display the New Hardware Found dialog box.
4.Select the Driver from disk provided by hardware manufacturer option and select OK.
5.Insert the driver disk provided with the adapter into the appropriate drive.
6.Type A:\NDIS3 at the prompt and press Enter.
7.Select the appropriate LAN Adapter and press Enter.
8.Select the appropriate Infrastructure Mode and enter the SSID of the wireless network.
9.Optionally, select the Channel and Bitrate parameters.
10.Press Enter.
11.Windows will prompt for the system disks. Enter the correct network path.
12.Restart Windows after the files are copied. The system will reboot and the installation will be complete.
