Beacon Computer Lan Adapter manual Loading Firmware for Windows 3.11 and DOS, Utility Description

Utilities

Loading Firmware for Windows 3.11 and DOS

The FLSH3545.COM program is used to load new firmware to systems operating under DOS and Windows 3.11.

To load new firmware:

1.Before upgrading the firmware, uninstall the driver or reboot the computer and do not load the driver during the boot process.

2.Type FLSH3545 at the DOS prompt.

3.Enter the option (see Table below).

NOTE: If using card and socket services, no options should be required.

4.Type the filename of the new firmware.

5.Press Enter.

Utility	Description
-p	Specifies the starting address for a block of 64 consecutive
	16-bit I/O ports. Make sure the block of I/O addresses does
	not overlap the address of another device in the machine.
	This can be used to override a card service assignment. If
	card services are not used, this will default to 0x140.
-s	Optional – If card services are used, this parameter is
	ignored. If card services are not used, this is the PC Card
	socket the PC Card is inserted into (default is 0).
-m	If card services are used, this parameter is ignored. If card
	services are not used, this is a block of memory the driver will
	use to view the PC Card CIS (default is 0xD000).
-q	Quiet Mode, no messages will appear while flash upgrade is
	in progress.

4-9