Manuals / Brands / Marine Equipment / Marine Radio / Becker Designed / Marine Equipment / Marine Radio

Becker Designed AR 4201 - ( O) (GK 415) Operating instructions, Repair instructions, CAUTION, oEquipment manuals, oSwitching on the unit

1 22

Download 22 pages, 2.38 Mb

Operating Instructions

Operating instructions

Connect the antenna and the mike to the corresponding connection jacks.

oSwitching on the unit

Switch on the portable VHF station using the ON/OFF switch (rotate volume control clockwise).

CAUTION

The battery charger shall be operated at a distanced of at least 50 cm (maximum cable lengt) from the portable VHF-Transceiver, to avoid any interference generated by the battery charger .

Becker GK 415 - ( )

Digital voltmeter (option)

Operation voltage indication

7V - 15V DC ± 0,1V

Repair instructions

If an equipment fault the unit may be sent to a Becker Dealer or the Be- cker customer service together with a description of the fault. The completed fault description shortens the repair times and hence lowers the resultant costs.

These operating instructions do not replace the equipment manuals listed below.

oEquipment manuals

to be purchased from the manufacturer or Becker Dealer

Maintenance and Repair DV 365003.04, Becker order No.:885.843-071

Page 8

Issue 05/2000

Issue 05/2000

Page 33

Contents

OPERATING INSTRUCTIONS BECKER AR 4201 - ( O) (GK 415) portable VHF Transceiver Page Table of contents Technical data Repair instructions Servicing and operation of lead-acidbatteries Important Introduction Safety information Additional information General information Servicing and operation of lead-acidbatteries Controls and indicators Operating instructions Technical data Function of controls and indicators oBasic settings in the service mode oEnding of the service mode Operating instructions oTransmit/receive mode NOTES oSetting the dynamic mike input sensitivity oSetting the “channel end” scanning range (if funtion SF8 ac- tivated) oEntry of password to interlock the equipment configuration NOTE oJamming of transmit button oFlashing of the LCD oErase stored frequencies oSetting the “channel start” scanning range (if funtion SF8 ac- tivated) oInhibiting the frequency setting (channel selection only) oInhibiting the frequency storage oOperation of the various modes oMode 1 (standard mode) oSetting the temperature display in °C or °F oSwitching on the scan function oSetting the hold time in the scan function (if funtion SF8 acti- vated) oSetting the IC level oCalibrating the temperature sensor oSetting addressable storage locations 1 to oMode 2 (display of fixed frequencies in the various channels) oChannel selection mode oScan function oSetting the sidetone level oSetting the audio auxiliary level oSetting the squelch threshold oMode 3 (indication of supply voltage) Service mode (equipment configurations)