Operating Instructions
| CH 99 (bottom line) | Indicates the storage channel |
| CH indication flashes | If the initiated storage operation |
| (bottom line) | is not completed by pressing the |
|
| store key |
| F (bottom line) | Indication that the selected |
|
| storage channel is not occupied |
| V 11.7 (bottom line) | Indication of supply voltage |
| All indicating segment | Supply voltage ≤ 10.5 V |
| flashes |
|
| CS 99 (bottom line) | Indication of scan function |
4 | Squelch key SQL | Switching the squelch on or off |
|
| (muting) |
5 | MDE key | Selection of mode |
6 | Exchange key | Mode 1: |
|
| Exchange of preset |
|
| frequency and active frequency |
Other modes :
Reset to Mode 1 and acceptance of momentarily active frequen cy with this frequency being stored at the same time as the preset frequency
7Frequency selector switch Switching the indicated frequency
(outer rotary switch) | in 1 MHz steps or the storage |
| channel upwards or downwards |
| in steps of 10 |
Becker GK 415 - ( )
oBasic settings in the service modeThe volume settings given in the service mode are set by the factory as basic settings using standard values. If reversion to the standard values is required, the portable VHF station must be switched off and switched on again by simultaneously pressing the STO and MDE keys.
oEnding of the service modeThe portable VHF station must be switched off to end the service mode.
Page 10 | Issue 05/2000 | Issue 05/2000 | Page 31 |