Beckett CF2300, CF1400 Wire the burner - R7184B, Electrical Shock Hazard, Typical wiring R7184B

Wire the burner — R7184B

Electrical Shock Hazard Figure 11. - Typical wiring (R7184B)

Electrical shock can cause severe personal in- jury or death.

yDisconnect electrical power before installing or servicing the burner.

yProvide ground wiring to the burner, metal control enclosures and accessories. (This may also be required to aid proper control system operation)

yPerform all wiring in compliance with the National Electric Code ANSI/NFPA 70 (Canada CSA C22.1).

Install the burner and all wiring in accordance with the National

Electrical Code and all applicable local codes or requirements.

Wire the burner in compliance with all instructions provided by the appliance manufacturer. Verify operation of all controls in accordance with the appliance manufacturer’s guidelines.

See Figure 11 for a typical wiring diagram, with R7184 oil primary, for reference purposes only.

Legend
FD	Fused Disconnect, by others	TR	Ignition transformer
LM	Limit controls, by others	M1	Burner motor
OP	Operating controls, by others	S1	Oil valve
PR	Oil primary control, R7184 typ.	T-T	24-volt thermostat/limit terminals
CC	Flame sensor, cad cell typical	F-F	Cad cell flame sensor terminals

14 Form 6104 BCF23-R05