Beckett CF1400 Adjusting plate initial setting, typical, b Spline nut for securing nozzle line

Figure 12 – Adjusting plate initial setting, typical

Legend

b Spline nut for securing nozzle line

c Bottom acorn nut (for head adjustments)

d Top acorn nut (for setting dim. Z only - do not loosen after setting Z)

e Indicator adjusting plate f Secondary adjusting plate g Primary adjusting plate

h Copper oil line from oil valve to nozzle line

Table 4a. CF1400 Initial indicator adjustment plate settings

		Head Position		Damper Position
	Tube	Approximate	Firing Rate	Approximate	Firing Rate
				Air Damper
		Head Setting	(gph)		(gph)
				Setting
		0	4.00	0	--
		1	4.50	10	--
		2	5.00	20	4.00
		3	6.00	30	5.00
		4	7.00	40	7.00
	A	5	7.50	50	8.00
		6	8.00	60	10.00
		7	9.00	70	11.00
		8	9.50	80	--
		9	10.00	90	--
CF1400		10	11.00	100	--
		--	--	110	--
		--	--	120	--
		0	7.00	0	--
		1	7.50	10	--
		2	8.00	20	--
		3	9.00	30	--
		4	10.00	40	7.00
	B	5	10.50	50	8.00
		6	11.00	60	10.00
		7	12.00	70	11.00
		8	13.00	80	12.00
		9	13.25	90	12.50
		10	13.60	100	13.00
		--	--	110	13.25
		--	--	120	13.60

Table 4b. CF2300 Initial indicator adjustment plate settings

		Head Position		Damper Position
	Tube	Approximate	Firing Rate	Approximate	Firing Rate
				Air Damper
		Head Setting	(gph)		(gph)
				Setting
		0	11.0	0	--
		1	12.0	10	7.0
		2	13.0	20	10.0
		3	14.0	30	13.0
	A	4	15.0	40	14.0
		5	16.0	50	15.0
		6	17.0	60	16.0
		7	18.0	70	17.0
CF2300		8	19.0	80	18.0
		9	20.0	90	19.0
		--	--	100	20.0
		0	12.5	0	--
		1	13.0	10	10.0
		2	14.0	20	13.0
		3	15.0	30	14.0
	B	4	16.0	40	15.0
		5	17.0	50	16.0
		6	18.0	60	17.0
		7	18.5	70	18.0
		8	19.0	80	18.5
		9	20.0	90	19.0
		--	--	100	20.0

Form 6104 BCF23-R05 17