Beckett CF1400 General Information, Specifications, Indicates an imminently, damage, To the Owner

General Information

Before you begin . . .

The following resources will give you addional information for your installation. We suggest that you consult these resources whenever possible. Pay particular attention to the appliance manufacturer’s instructions.

Appliance manufacturer’s instructions -Always follow the appliance manufacturer’s instructions for burner installation, equipment and set-up.

1–800–OIL–BURN- Beckett’s technical services hot-line. www.beckettcorp.com - Beckett’s website.

Hazard definitions

Indicates an imminently

hazardous situation, which, if not avoided, will result in death, serious injury, or property

damage.

Indicates a potentially

hazardous situation, which, if not avoided, could result in death, severe personal injury,

and/or substantial property damage.

Indicates a potentially

hazardous situation, which, if not avoided, may result in personal injury or property

damage.

To the Owner:

Thank you for purchasing a Beckett burner for use with your heating appliance. Please pay attention to the Safety Warnings contained within this instruction manual. Keep this manual for your records and provide it to your qualified service agency for use in professionally setting up and maintaining your burner.

Your burner will provide years of efficient operation if it is professionally installed and maintained by a qualified service technician. If at any time the burner does not appear to be operating properly, immediately contact your qualified service agency for consultation.

We recommend annual inspection/service of your gas heating system by a qualified service agency.

Within the boundaries of the hazard warning, there will

Specifications

be information presented describing consequences if the warning is not heeded and instructions on how to avoid the hazard.

NOTICE

Intended to bring special attention to information, but not related to personal injury or property damage.

Agency approvals

yUL listed to comply with ANSI/ UL296 and certified to CSA B140.0.

yAccepted by N.Y.C. M.E.A.

yOther approvals may be available and must be specified at time of order.

Fuels

Firing Range

Motor (CF1400)

Motor (CF2300)

Ignition Trans.

Housing

Fuel Unit

Oil Nozzle

Dimensions

#1 or #2 Fuel Oil

BCF1400 - 4.0 to 13.6 gph BCF2300 - 7.0 to 19.9 gph

1/2 HP 3450 rpm 120/60 Hz Standard

6.5 amps @ 120 VAC

3/4 HP 3450 rpm 120/60 Hz Standard 12.5 amps @ 120 VAC

Optional Voltages: 240 VAC/1-PH,

208, 240, 480 VAC/3-PH,

50Hz Continuous Duty Cast aluminum 100 to 300 psig 45o to 70o Solid Refer to Figure 7.

Form 6104 BCF23-R05

3