Instruction Manual – Model CF1400 Oil Burner
Connect fuel line(s)
Install the oil lines using the following guidelines. Failure to comply could lead to equipment damage and present a risk of severe personal injury, death or substantial property damage due to leakage of oil and potential fire hazard.
Use only flare fittings at joints and connections. Never use compression fittings.
Figure 8a – One-pipe oil flow with “H” pump
g
d | c | 300 psig |
|
| |
300 psig |
| b |
1410ao | p |
|
Install fittings only in accessible locations to assure any leak will be detected.
Where joint sealing is needed, use only pipe dope. Never use Teflon tape. Tape strands can break free and damage the fuel unit.
Never use a
The fuel unit is shipped without the
Figure 8b – One-pipe oil flow with “B” pump
d | c | 300 psig | g |
300 psig |
| b |
|
|
| p | |
|
|
| |
|
| 1420ao |
|
Legend |
|
b Nozzle port | d Nozzle & adapter |
c Oil valve(s) | g Inlet port |
| p Air bleed valve |
❏Fuel unit by-pass plug
•The CF1400 burner is shipped without the
•The
•You must install the
❏Oil supply/return lines
•Install the oil tank and oil lines in accordance with all applicable codes.
•Size the oil supply and return lines using the guidelines given in the fuel unit literature included in the literature envelope. Oil line flow rate will equal the burner rate for
8 | Form 6104 |
