Behringer A50-13413-00005 MICROPHONE QUICK START GUIDE

ULTRALINK UL2000M

MICROPHONE QUICK START GUIDE

24	MICROPHONE QUICK START GUIDE

Contents

Page IMPORTANT SAFETY INSTRUCTIONS TABLE OF CONTENTS 1. INTRODUCTION 1.1 Before you get started Fig. 1.1: Swapping plugs on the switching power supply unit 1.1.4 Initial operation of the microphone To change the transmitter (mic) batteries: Unscrew the bottom end of the microphone and pull out the battery compartment Remove the base plate in order to connect the battery to the contacts 2.ULR2000 RECEIVER 2.1Control elements and connections ’s front side COLOR CODE ANTENNA Two bar antennae can be connected to the ANTENNA 1 and ANTENNA 2 connectors 2.1.2 Display Fig. 2.2: Closeup of the ULR2000 display 2.2 Menu items in detail A storage location can be selected by pressing the UP or DOWN buttons or channel color) always 2.2.2 SCAN 1.Press the SET button to get to the menu 2.2.4 AUTO MUTE To bridge this latency time, the ULR2000 offers a practical Auto Mute function: Activating/deactivating the Auto Mute function Press the UP or the DOWN buttons to turn the auto mute function on or off 2.2.5 DISPLAY Deactivating LOCK 2.2.7 PRESET Factory presets (Presets 2, 3 and 4) User preset (Preset 1) Loading a preset 3. ULM2000 MICROPHONE 3.1 Control elements ’s underside 3.2 Hand-heldtransmitter operation Changing the channel when the transmitter is powered off 3.2.3 Setting your own frequency 1.Engage MUTE. The transmitter can now be switched to the programming mode 3.Enter all 6 digits one after another in the following fashion: Confirm your selection by briefly pressing the POWER button 8.Disengage the MUTE switch A user-assignedfrequency is automaticallystored in the user preset (Preset 1) 3.2.4 Preset The ULM2000 lets you work with 4 presets, each with 8 channels Table 3.1: Factory preset frequencies (presets 2,3 and 4) 7.After setting the desired preset, disengage the MUTE switch 3.2.5 Mic Gain 3.Select one of the following two digits on the selection switch: Low Gain: select High Gain: select 3.3 Status query 3.5 ULM2000 level setting 4. APPLICATION EXAMPLE 5.INSTALLATION 5.1Installation information 5.2 Installation in a rack 5.3 Audio connections 6.SPECIFICATIONS 6.1ULR2000 receiver 6.2 ULM2000 microphone FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION ULTRALINK ULM2000/ULR2000 Responsible party name: MUSIC Group Services USA, Inc Address: MICROPHONE QUICK START GUIDE