7EUROLIGHT LC2412 User Manual

(10)

(11)

(5)

(1)

(2)

(4)(3)

Fig. 2.1: Section overview

2.1 Control elements of the A PRESET section

(33)

(12)

Fig. 2.2: A PRESET section (detail)

(8)

(9)

(6)

(7)

2.2Control elements of the B MEMORY section ( 2 )

The faders of the B MEMORY section are located in the block underneath the A PRESET section.

(13)These faders control the illumination level of an entire group of channels in a ratio to one another that you previously determined by setting up the A PRESET faders and saving this setting as a memory.

(18)

(12)Faders 1-12. Used to set the intensity of light elements connected to the dimmer pack.

(33)UPPER switch. When you press this switch, the A PRESET section is switched to the twelve additional channels. After that, you can set up the intensity of channels 13 - 24. See also chapter 3.2.

Setting up presets

Channel faders are used for setting up a preset that can be directly recalled by moving fader A (41). As in all other setups, the MAIN fader (43) (see chapter 2.6) determines the maximum illumination level of selected light sources.

(19)

(20)

(21)

(13)

(14)

(15)

(16)

(17)

Fig. 2.3: B MEMORY section