Function Selection
Depending on the selected program, the selectable auxiliary functions are selected by pressing the each function’s button.
The light of the selected function comes on. Since it is not possible to select some of the auxiliary functions together, one of them becomes off when the other one is selected.
program. Therefore, when the same buttons are pressed for 3 seconds, light of the second auxiliary function will go off.
Auxiliary Functions
Prewash
To wash the very dirty laundries, you can use this function in the cotton and synthetic programs.
Rinse Plus
You can increase the number of the
current rinsing cycles by using this function. Thus, the risk of the sensitive skins get effected by the detergent remaining on the laundry is reduced.
Rinse Hold
If you desire to leave your synthetic and wool fabrics in the machine after the wash program you may select the Rinse hold option to prevent them getting wrinkled. If you want to cancel the “Rinse Hold” func- tion, you have to press on “Start/Pause/ Cancel” button first, select the desired spin speed and then repress on the “Start/ Pause/Cancel” button.
Child Lock
“This machine is equipped with a child lock in order to prevent the program flow to be affected when the buttons are pressed
during washing cycles. In order to enable the child lock, press and keep pressed the 1st and 2nd auxiliary function buttons from the left at the same time for 3 seconds.
The light of the 1st auxiliary function but- ton will flash continuously.
After the program completes, it is necessary to disable the child lock in order to initiate a new program or interfere the
Program Flow
After the machine starts to operate, the related light in the program
When a step is complete, the light of the previous step goes off and the light of the related step comes on. When On/Off button is pressed, the “Door” light comes on.
After the washing program is selected, “Washing” light on the program
When the program ends “End” light comes on. After the program is complete, the machine will not allow you to open the door for a while for your safety. If you want to open the door meanwhile, the door will not open and the “Door” light will flash. After the door lock is deactivated the “Door” and “End” lights will come on. Now you can open the front door. You can switch your machine in to the “Pause” mode by press- ing the “Start/Pause/Cancel” button while your machine is operating.
In this case, “Start/Pause/Cancel” light will flash. You can make some changes in the program settings in the Pause mode (See. Changing the Program) and you may also benefit from the laundry addition function if the “Pause” mode is selected at a suitable step of the program (See. Laun- dry addition function).
In order to return to the “Washing” mode from the “Pause” mode, you need to press the “Start/Pause/Cancel” button again.
In this case, “Start/Pause/Cancel” light will flash and your machine will resume its program.
12
EN
