Warnings
•This product is designed for household usage.
•Your washing machine is adjusted to 230 volts. Your machine may not operate with low voltage.
•If the current value of the fuse at your home is less then 16 amperes, consult a qualified electrician and have a fuse of 16 amperes installed.
•When using with or without a transformer, make sure that the grounding installation is made by a quali- fied electrician. When used without grounding, our company shall not be responsible for the possible damages.
•In order to make your machine ready to use, call Authorized Service and if your clean water installation and water drains are not proper, call a qualified plumber.
•Your machine should not be placed on a rug covered floor. Otherwise, electrical parts may overheat since your machine will not be able to take air from the bottom. This may lead to the machine malfunction.
•While installing the machine, make sure that the hot and cold water taps are connected correctly. Otherwise, your laundries may come out hot in the end of washing process and worn out.
•When the supply cord/plug of the machine is damaged, you must call the authorized service.
•Make sure that the water inlet hoses are new. Do not use worn out/used water inlet hoses again. It may cause stains to remain on your laundries.
•Before washing the clothes that are pre- treated with cleaning agents (gasoline ether, liquid stain remover and etc.) rinse thoroughly with clean water.
•Never wash the device with a water hose! There is a risk of electric shock! Before cleaning, always disconnect the electricity connection by unplugging.
•Never touch the plug with wet hands.
Never grab from the cable but from the plug when unplugging.
•If the power cable or the plug is damaged, or the appliance shows any other errors, do not operate the appliance!
•For the failures that can not be solved by applying the information given in these operating instructions:
Turn off the machine, unplug it, close the water tap and contact with the cus- tomer service center. Never try to repair the machine by yourself.
•When you operate your washing ma- chine for the first time, use Cotton 90o program with detergent without loading the machine with laundry in order to make it ready for washing your laundry. After washing the very dirty clothes such as the working clothes of a car techni- cian, it is recommended to repeat the machine cleaning process.
•The performance of your washing machine depends on the compound effect of the machine, water and the cleaning agent that is used. If poor and unqualified cleaning agents are used, stains on your laundries will be stabilized. Before washing the stained laundries, pay attention to clean them as described in the following pages.
•Your machine is designed to resume
its operation when the power restores after a power failure. You can not cancel the program by pressing On/Off button. When the power restores, the machine will resume from the point it stopped.
•During the production, some water may have remained in your machine because of the quality control processes. It does not cause any damage to your machine.
•Plug must be accessible after installation.
•The repair or change of main plug should be carried out by authorized technicians or specialists.
•Main water pressure should be between
1 - 10 bars.
5
EN
