Safety Precautions
Operating Instructions |
Troubleshooting Tips Care and Maintenance
Forced Operation
Operation procedures when the remote control can't be used.
The operation will be started if the power button is pressed.
If you want to stop operation,
|
|
| Power |
|
|
|
| button |
|
|
|
| Open the front | |
|
|
| panel upward | |
| Cooling Model |
| Heat pump Model |
|
| Room Temp. 24°C | 21°C Room Temp. < 24°C | Room Temp. < 21°C | |
Operating mode | Cooling | Cooling | Healthy Dehumidification | Heating |
Indoor FAN Speed | High | High | High | High |
Setting Temperature | 22°C | 22°C | 23°C | 24°C |
Test operation
During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room temperature and resets in 18 minutes.
During test operation, if remote controller signal is received, the unit operates as remote controller sets. If you want to use this operation, open the front panel upward and Press the power button let it be pressed for about 3 seconds.
If you want to stop the operation,
Auto restart
In case the power comes on again after a power failure, Auto Restarting Operation is the function to operate procedures automatically to the previous operating conditions.
So there is no need of activating this function by pressing any key or button.
In the initial mode, the fan operates at a low speed and the compressor starts 2.5~3 minutes later. As the compressor starts, the fan speed also resumes its previous setting mode.
Additionally, in order to cancel auto restart operation press power button let it be pressed for about
6 seconds. To operate auto restart operation again, press power button for about 6 seconds as well.
Helpful information
Fan speed and cooling capacity.
The cooling capacity indicated in the specification is the
value when the fan speed is set to high, and the capacity will |
| h | |
ig | d | ||
| H |
| |
be lower at low or medium fan speed. |
|
| e |
pe | |||
High fan speed is recommended when you wish to cool the | S |
| |
|
|
| |
room quickly.
12
