Operating Instructions
Healthy dehumidification operation
1 | Press the Start/Stop button. |
The unit will respond with |
a beep.
2 | Open the door of the remote controller. To select Healthy |
Dehumidification Operation, press the Operation Mode |
Selection button.
Each time the button is pressed, the operation mode is shifted in the direction of the arrow.
ENGLISH
Cooling | Auto | Healthy | Heating |
| Changeover | Dehumidification | (Heat pump model only) |
ON
3 | Set the fan speed again with the door |
of the remote controller still closed. |
You can select the fan speed in four
Natural wind by the CHAOS logic
❏For fresher feeling, press the Indoor Fan Speed Selector and set to CHAOS mode. In this mode, the wind blows like a natural breeze by automatically changing fan speed according to the CHAOS logic.
During Healthy Dehumidification Operation
❏If you select the dehumidification mode on the operation selection button, the product starts to run the dehumidification function. It automatically sets the room temp. and airflow volume to the best condition for dehumidification, based on the sensed current room temp.
In this case, however, the setting temp. is not displayed on the remote controller and you are not able to control the room temp. either.
❏During the healthy dehumidification function, the airflow volume is automatically set according to the optimization algorithm responding to the current room temp. status, so that the room condition is kept healthy and comfortable even in the very humid season.
Owner's Manual 17