Auto operation (Optional)
1 | Press the Start/Stop button. |
The unit will respond with |
a beep.
Operating Instructions
ENGLISH
2 | Open the door of the remote controller. To select Auto |
Operation, press the operation mode selection button. |
Each time the button is pressed, the operation mode is shifted in the direction of the arrow.
Cooling | Auto | Healthy | Heating |
|
| Dehumidification | (Heat pump model only) |
ON
3 | The temperature and fan speed are automatically set by the |
electronic controls based on the actual room temperature. If |
you want to change the set temperature, press the Room Temperature Setting buttons. The cooler or warmer you feel, the more times (up to two times) you should press the button. The set temperature will be changed automatically.
To raise the temperature
To lower the temperature
For this operation A1 appears on the display (Cooling plasma model only)
During Auto Operation
❏You cannot control the indoor fan speed. It has already been set by the Fuzzy rule.
❏If the system is not operating as desired, manually switch to another mode. The system will not automatically switch from the cooling mode to the heating mode, or from heating mode to cooling mode, it must be done by manually resetting.
❏During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and down automatically. If you want to stop
Owner's Manual 15
