ELECTRICAL REQUIREMENTS

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating plate inside the appliance corresponds to your electricity supply. Rating plate is affixed on the left hand side of inner liner We recommend that this appliance is connected to the mains supply via a suitable switched and fused socket. The appliance must be positioned so that the plug is accessible.

Should the mains lead of the appliance become damaged or should it need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a BEKO Authorised Service Agent.

WARNING! THIS APPLIANCE MUST BE EARTHED

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.

The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an ASTA approved BS 1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

TRANSPORTATION INSTRUCTIONS

1.The appliance should be transported only in a vertical upright position. The packing as supplied must be intact during transportation.

2.If during the course of transport the appliance has to be transported horizontally, the product must only be laid on its left hand side (when facing the door front) and it must not be operated for at least 4 hours to allow the system to settle after the appliance is brought back to upright position.

3.Failure to comply with the above instructions could result in damage occurring. to the appliance. The manufacturer will not be held responsible if these instructions are disregarded.

4.The appliance must be protected against rain, moisture and other atmospheric influences.

5.When positioning your appliance take care not to damage your flooring, pipes, wall coverings etc. Do not move the appliance by pulling by the door or handle.

6.Empty any water in the drain tray before moving. See section ‘Defrosting’ and ‘Care & cleaning’ for further information.

IMPORTANT : Care must be taken while cleaning / carrying the appliance to avoid touching the bottom of the condenser metal wires at the back of the

IMPORTANT! FITTING A DIFFERENT PLUG

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

(See diagram).

1.Connect the green-yellow or green (Earth) wire to the terminal in the plug marked 'E' or with

the symbol

 

or coloured

green and yellow or green.

2.Connect the blue (Neutral) wire to the terminal in the plug marked 'N' or coloured black.

3.Connect the brown (Live) wire to the terminal in the plug marked 'L' or coloured red.

GREEN &

 

 

 

 

6mm.

YELLOW

 

 

OR

 

GREEN

32mm.

 

L

 

 

 

BROWN

6mm.

 

 

 

N

 

 

OR

 

 

22mm.

RED

 

BLUE

 

 

 

6mm.

 

 

12mm.

OR

 

 

 

 

 

 

BLACK

 

 

 

 

CORD GRIP

FUSE

FITTED WITH BS 1362 13A FUSE ALWAYS FIT BS 1362 REPLACEMENT CARTRIDGE FUSE

appliance as you might injure your fingers and hands.

IMPORTANT : This appliance is not designed for stacking with any other appliance.

Do not attempt to sit or stand on top of your appliance as it is not designed for such use. You could injure yourself or damage the appliance.

"IMPORTANT: Make sure that mains cable is not caught under the appliance during and after carrying / moving the appliance, to avoid the mains cable becoming cut or damaged."

Do not allow children to play with the appliance or tamper with the controls. BEKO plc declines to accept any liability should the instructions not be followed.

With alternative plugs a 13 A fuse must be fitted either in the plug or adaptor or in the main fuse box.

If in doubt contact a qualified electrician.

3

4

Page 2 Page 4
Page 3
Image 3
Beko TLDA 567 manual Electrical Requirements, IMPORTANT! Fitting a Different Plug
Page 2 Page 4

TLDA 567 specifications

The Beko TLDA 567 is a highly efficient and stylish appliance that combines functionality with modern design to enhance any kitchen space. This 60 cm wide slimline dishwasher stands out due to its excellent features, innovative technologies, and user-friendly characteristics.

One of the standout features of the Beko TLDA 567 is its A+++ energy rating, which ensures maximum efficiency, reducing energy consumption and contributing to cost savings. With a capacity to accommodate up to 15 place settings, it is perfect for both small households and larger families. This model has six different wash programs, including intensity options tailored for various levels of soiling, meaning it can handle everything from lightly soiled dishes to heavily caked pots and pans.

The "Quick & Clean" function is another remarkable characteristic, allowing users to wash a full load in just 30 minutes. This is ideal for those who are always on the go and need their dishes cleaned in a hurry. Additionally, the "Half Load" option lets users run the dishwasher when it’s only partially full, saving both time and water.

The TLDA 567 is equipped with Beko's corner wash feature, which ensures that every corner of the dishwasher receives thorough cleaning, optimizing water spray patterns to reach every dish effectively. The interior of the dishwasher is designed with adjustable racks and folding tines, enabling customizable space for bulky items, which enhances usability.

Moreover, this dishwasher incorporates an advanced AquaIntense technology, providing extra water pressure for the lower basket to tackle stubborn dirt on pots and pans. This feature guarantees a deeper clean, ensuring that every dish sparkles pristine after each wash.

Another modern attribute of the Beko TLDA 567 is its quiet operation, with a noise level of only 48 dB, making it one of the quieter models on the market. This is particularly ideal for open-plan living spaces where noise can be a concern.

With its sleek design, efficient washing capabilities, and innovative features, the Beko TLDA 567 proves to be a reliable and stylish choice for any kitchen, combining practicality with performance. As a result, it is more than just a dishwasher; it is an essential appliance that significantly simplifies the dishwashing experience while aligning with energy-saving practices.
Top Page Image Contents