18 / EN Washer-Dryer
Installation
3.6 Connecting to the drain• Connecttheendofthedrainhosedirectlytothewastewaterdrain,sinkortothewashbasin.
A
CAUTION
¾Your house will be flooded if the hose comes out of its housing during
water discharge. Moreover, there is risk of scalding due to high washing
temperatures! To prevent such situations and to ensure smooth water
intake and discharge of the machine, fix the end of the discharge hose
tightly so that it cannot come out.
90 cm
40
90
40
90 cm
•Themaximumdistancethemachinecanbeplacedfromthewallis30cm.
•Attachthehoseataheightofatleast40cm,and90cmatmost.
•Incasethe hoseiselevatedafterlaying itonthefloorlevel orclosetotheground (lessthan40cm
above the ground), water discharge becomes more difficult and the laundry may come out excessively
wet. Therefore, follow the heights described in the figure.
•Toprevent flowing of waste water back into the machine and to allow for easy discharge, do not
immerse the hose end into the waste water or do not drive it in the drain more than 15 cm. If it is too
long, cut it short.
•Paycare nottobend theendof thehose,step onitor pinchthehose betweenthe drainandthe
machine.
•Ifthelengthof thehoseistooshort,use itbyaddinganoriginalextension hose.Lengthofthehose
may not be longer than 3.2 m. To avoid water leak failures, the connection between the extension hose
and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and
leak.