20 / EN Washer-Dryer
Installation

3.8 Electrical connection

Connect the product to an earthed/grounded outlet protected by minimum of 16 A fuse. Our company shall
not be liable for any damages that will arise when the product is used without grounding in accordance
with the local regulations.
•Connectionmustcomplywithnationalregulations.
•Powercableplugmustbewithineasyreachafterinstallation.
•Ifthecurrentfuseorcircuitbreakerislessthan16Amperes,pleasehaveaqualifiedelectricianinstall
a 16 Ampere fuse or circuit breaker.
•Thevoltagespecifiedinthe“Technicalspecifications”sectionmustbeequaltoyourmainsvoltage.
BDANGER

¾Damaged power cables must be replaced by the Authorised Service

Agents.

Important
Fitting a different plug
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals on your plug, proceed as follows:
1 Connect the green - yellow or green (earth) wire to the terminal in the plug marked ‘E’ or with the
symbol f or coloured green and yellow or green.
2 Connect the blue (neutral) wire to the terminal in the plug marked ‘N’ or coloured black.
3 Connect the brown (live) wire to the terminal in the plug marked ‘L’ or coloured red.
With the alternative plugs a 16A fuse must be fitted either in the plug or adaptor or in the main fuse box.
If in doubt contact a qualified electrician.