14 / EN Washer-Dryer
3 Installation
B
DANGER
¾Have the installation and electrical connections of the product made by
a competent person. Manufacturer shall not be held liable for damages
that may arise from procedures carried out by unauthorised persons.
DANGER
¾The weight of your product is not suitable to be carried by one person.
ACAUTION
¾Prior to installation, visually check if the product has any defects on it. If
so, do not have it installed. Damaged products cause risks for your safety.
A
CAUTION
¾Preparation of the location and electrical, tap water and waste water installations at
the place of installation are under customer’s responsibility.
¾Make sure that the water inlet and discharge hoses as well as the power cable
are not folded, pinched or crushed while pushing the product into its place after
installation or cleaning procedures.
To make the product ready for use, review the information in the user manual and take care that the
electricity, tap water supply and water drainage systems are appropriate. If they are not, call a qualified
technician and plumber to have any necessary arrangements carried out.

3.1 Appropriate installation location

•Placethemachineonarigidfloor.Donotplaceitonalongpilerugorsimilarsurfaces.
•Donotplacetheproductonthepowercable.
•Donotinstalltheproductatplaceswheretemperaturemayfallbelow0ºC.(See,Warningsfordrying)
•Placetheproductatleast1.5cmawayfromtheedgesofotherfurniture.
•Thereshouldnot beanylockable,slidingorhinged doorthatmaypreventthe loadingdoorfromfully
opening in the installation place of this product.
•Operatetheproductinawell-ventilatedanddust-freeenvironment.