Set the time delay as you require.
4.Delayed operation of the selected program is started by pressing the
“Start/Pause/Cancel” button after making the time delay selection.
CMore laundry may be loaded/ removed during the time delay period.
Changing and canceling the time delay.
1.Press the “Start/Pause/Cancel” button to switch the machine to
“Pause” mode.
2.Press “Start/Pause/Cancel” button to start the program after making the new time delay selection.
CIn the event that any of the lights of
Starting the Program
1.Press “Start/Pause/Cancel” button to start the program.
2.“Start/Pause/Cancel” button will light up to indicate that the program has started.
3.The door is locked and the “Ready” light fades.
Progressing a program
Progress of a running program is shown through the program
will turn off. The symbol that is lit up at the far right of the series of symbols indicates the step that is being carried out.
The “Wash” light on the program follow- up indicator illuminates when “Start/ Pause/Cancel” button is pressed after selecting the washing program. “Spin” lamp will light up at the final spin step. The “Ready” lamp will light up again when the program is over and the door is unlocked.
You can put your machine into “Pause”
mode by pressing the “Start/Pause/ Cancel” button when it is operating. In this case, “Start/Pause/Cancel” light will flash.
CIf the machine is not spinning, the program may be in rinse hold mode or the automatic spin correction system has been activated because of unbalanced distribution of laundry in the machine.
Changing the program after the program has started
You can use this feature after your machine has started to wash different textile groups in the same batch
of clothes under higher or lower temperatures.
For example;
Press and hold the “Start/Pause/ Cancel” button for 3 seconds to “Cancel” the program in order to select “Cottons 40” program instead of “Cottons 60” program.
Select the “Cottons 40” program by rotating the program knob.
Press “Start/Pause/Cancel” button to start the program.
CThe program which is selected first will go on even if the program selection button is moved and another program mode is selected while the machine is operating.
You must cancel the ongoing program in order to change the washing program. (See, Canceling a Program)
Selecting or cancelling an auxiliary function/temperature/spin speed
1.Press the “Start/Pause/Cancel” button to switch the machine to
“Pause” mode.
2.Change the auxiliary function’s temperature and spin speed.
3.Press “Start/Pause/Cancel” button to start the program.
CThe selection to be made must be appropriate. For example, if your machine is on the main wash cycle, you may select additional rinse
20
EN
