Features and Functions
LED Indicators and Audible Alarms
The Unit will alarm to indicate certain events.
AC Power Battery Power | Fault | Replace Battery |
Low Battery press and hold Overload
Visual | Audible Alarm | Description | |
Label | Indicator |
|
|
AC Power | AC Power LED | None | The Unit is operating normally on AC power. |
| lights |
|
|
Battery Power | Battery Power | Tone every | The Unit is operating on battery power. |
| LED lights | 10 seconds | The alarm will stop when main AC power |
|
|
| is returned. |
Low Battery | Low Battery LED | Tone every | The battery energy is running low. This alarm |
| fl ashes | 1 second | will continue until the Unit performs a forced |
|
|
| shutdown when the battery is depleted. |
Fault | Fault LED lights | Continuous tone | A fault has occurred. Disconnect all |
|
|
| equipment from the Unit prior to checking. |
Overload | Overload LED | Tone every | The Unit is overloaded. Remove connected |
| fl ashes | 1 second | equipment until fault mode is cleared. |
Replace Battery | Replace Battery | None | The battery has reached the end of its useful |
| LED lights |
| life. The user must replace the battery as |
|
|
| soon as possible to ensure proper operation |
|
|
| of the Unit. |
NOTE: The audible alarm will not sound after the alarm is muted.
Flashlight
The Unit contains a fully functional, detachable LED flashlight. The flashlight will automatically illuminate when the power goes out. This safety function provides an easy way for you to find the flashlight while illuminating the area surrounding the Unit. The LED flashlight may be removed from the Unit to use as a handheld, portable flashlight.
To remove the LED flashlight from the Unit’s recharging dock, pull the top of the LED flashlight out and downward until it disengages. When not in use, return the LED flashlight to the Unit’s recharging dock. The LED flashlight will only
fit one way in the recharging dock: with the flashlight lens pointing toward the top of the Unit and the LED flashlight button toward the outside. The LED flashlight will only recharge if properly docked on the Unit.
Flashlight Recharging and Battery Replacement
CAUTION:
•The detachable LED flashlight contains 3 NiMH 700mAh AAA batteries. When replacing batteries, replace with the same number
and type of batteries. Do not attempt to use alkaline or other
•Risk of energy hazard. Before replacing batteries, remove conductive jewelry such as chains, wristwatches, and rings. High energy through conductive materials could cause severe burns.
•Do not
•Carefully install the batteries in the LED flashlight housing, ensuring proper polarity. Reverse polarity installation may cause damage. The battery installation polarity is labeled on the LED flashlight housing.
•Do not heat or incinerate the battery. The battery may explode.
•Only use the UPS Unit to recharge the batteries. Charging under other conditions can cause the battery to leak, overheat, burst, and/or catch fire.
•Properly dispose or recycle used batteries.
5
