Using the KVM Switch

To modify the hot-key preceding sequence from the default Scroll Lock, you can either hit the hot-key sequence: scrlk – scrlk – H – (y), y = SCROLL LOCK, CAPS, ESC, F12 or NUM LOCK (as detailed in the Hot-Key Quick Reference Table below).

or

You can use another method: Press and hold the last button to enter the hot-key setting mode.

Step 1. Press and hold the last button (i.e., the second button on the 2-port model or the fourth button on the 4-port model) till you hear two beeps. Then release the button.

Step 2. Within two seconds, you should hit any of the selectable hot-key triggers (y), y = SCROLL LOCK, CAPS, ESC, F12, NUM LOCK, LEFT CTRL, or RIGHT CTRL to be your hot-key trigger.

For example, if you hit CAPS after hearing the two beeps, then the hot key will be: CAPS – CAPS – command key.

For detailed hot-key sequences and their corresponding functional commands, please refer to the Hot-Key Quick-Reference Table below.

Hot Key Quick Reference Table

2-/4-Port SOHO KVM Switch with Audio -- & Mic -- Operation Commands for Hot Keys/Front-Panel Buttons

Hot-key sequence = [ScrLk] + [ScrLk] + Command key(s)

* user-definable preceding sequence = SCROLL LOCK, CAPS, F12 or NUM LOCK, LEFT_CTRL, RIGHT_CTRL

Command

Hot Keys1

Front-Panel Buttons

Description

 

ScrLk + ScrLk + (x)

 

 

Select Computer Channel 2

(x is a top-row number

Press the computer icon on

Select the active computer channel

(Joint-select PC port/audio

key) x = 1~2 / x = 1~4

the left of a button to select

(Hot key: Joint-select PC port/audio & mic,

& mic, if binding is enabled)

for PC channel no.

the active computer channel

if binding is enabled)

Select Audio & Mic Channel 2

ScrLk + ScrLk + (Fy)

 

Select the active audio & mic channel

(Joint-select PC port and audio

Fy = F5~F6/Fx=F5~F8

--

(Hot key: Joint-select PC and audio & mic channel,

& mic, if binding is enabled)

(Fy is a function key)

 

if binding is enabled)

Bind Computer and

 

 

Enable the binding of PC port and audio & mic

 

 

switching. (Hot key: Once this feature is enabled, any

Audio & Mic Switching 2

ScrLk + ScrLk + Q

--

[Default]

 

 

computer and/or audio & mic switching by hot keys is

 

 

 

bound together) (factory default)

Unbind PC and

ScrLk + ScrLk + W

--

Disable the binding of PC port and audio

Audio & Mic Switching 2

& mic switching

Next lower PC channel 2

ScrLk + ScrLk +

 

Select the next lower connected PC channel

(Joint-select PC/audio & mic,

--

(Hot key: Joint-select PC/audio & mic, if binding

(arrow up)

if binding is enabled)

 

is enabled)

 

 

Next higher PC channel 2

ScrLk + ScrLk +

 

Select the next higher connected PC channel

(Joint-select PC/audio & mic,

--

(Hot key: Joint-select PC/audio & mic, if binding

(arrow down)

if binding is enabled)

 

is enabled)

 

 

Previous PC channel

ScrLk + ScrLk +

--

Toggle between the previous channel and

Backspace

current channel

 

 

 

ScrLk + ScrLk +

Press and hold down last

 

 

button (Button 2 / Button 4)

 

 

H + (y)

 

 

until you hear three beeps,

 

Define Hot-Key

y = SCROLL LOCK,

Select the hot-key preceding sequence among

release the button, and then

Preceding Sequence

CAPS, ESC, F12, NUM

6 alternative keys

press (y) key. This resets

 

LOCK, LEFT_CTRL,

 

 

hot-key preceding sequence

 

 

or RIGHT_CTRL

 

 

to SCROLL LOCK.

 

 

 

 

 

Open Note Pad

 

Read the version of firmware that is currently on

Read KVM

 

the KVM Switch. This is helpful when a firmware

 

--

upgrade is performed as it gives you the ability to read

Firmware Version

ScrLk + ScrLk + V

 

the version of firmware, before and after the upgrade,

 

 

 

 

 

to ensure the firmware has installed correctly.

1

2

3

4

5

6

7

8

section

13

Page 15
Image 15
Belkin F1DD102L user manual Audio & Mic Switching ScrLk + ScrLk + Q