Belkin F506230-3 user manual Quick Set up-Setting up Your Belkin Wireless Cable/DSL Router

Quick Set up

Quick Set up–Setting up Your Belkin Wireless Cable/DSL Router

If you are familiar with networking, you can use this Quick Setup procedure to setup your Router. If you need more detail to setup your Router, please read further into this manual.

Setting up the Router is accomplished in 3 easy steps

1.Connect the Router to your network.

2.Configure your computers' networking settings.

3.Configure the Router to your ISP’s settings.

Connect the Router to your network.

1.Power down your equipment.

2.Connect a network cable between each of your PCs and the Router. Connect each PC to one of the ports on the rear of the Router labeled LAN.

3.Connect a network cable between the Router and your cable or DSL modem. Be sure this cable is plugged into the port labeled “WAN” on the Router.

4.Power on the cable or DSL modem.

5.Connect the power adapter to the Router.

6.After the cable or DSL modem and the Router are turned on, the Router’s WAN link light should be on. This indicates that the modem and the Router are connected to each other.

7.Turn on the rest of your computers. After your computers boot up, a LAN link light (on the front of the Router) will be on for each port to which a wired computer is connected. These lights are your means to verify that your computers are connected.

6