Belkin F506230-3 user manual Troubleshooting, configured as PPPoE and fill these

Troubleshooting

My connection type is Dynamic	2. Make sure the cable or DSL line
IP Address. I cannot connect to the	is properly attached on your
Internet.	cable or DSL modem. Refer the
	manual of your modem to verify
	that it works normally.
	3. Make sure the network cable
	between the modem and the
	router is well connected. Power
	off the modem; wait a
	few seconds and then power it
	on again.
	4. Your ISP may bind your
	connection to the MAC address
	of your computer’s NIC. Clone
	your MAC address.
My connection type is PPPoE. I	1. Since your connection type is
cannot connect to the Internet.	PPPoE, your ISP will assign you
	an account name and password
	and service name. Make sure the
	Router connection type is
	configured as PPPoE and fill these
	settings are entered properly.
	2. Make sure your computers are
	correctly configured and all
	network cables are properly
	connected.
	3. Make sure the coaxial cable or
	DSL line is properly attached on
	your cable or DSL modem. Refer
	the manual of your modem to
	verify it works normally.

65