Manually Configuring Network Settings

Manually Configuring Network Settings in Windows 98 or Me

1.Right-click on “My Network Neighborhood” and select “Properties” from the drop-down menu.

2.Select “TCP/IP -> settings” for your installed network adapter. You will see the following window.

(2)

(1)

(3)

3.If “Specify and IP address” is selected, your Router will need to be set up for a static IP connection type. Write the address information in the table below. You will need to enter this information into the Router.

4.Write the IP address and subnet mask from the “IP Address” tab (3)

5.Click the “Gateway” tab (2) . Write the gateway address down in the chart.

94

Page 98
Image 98
Belkin F5D9230-4 user manual Manually Configuring Network Settings in Windows 98 or Me