Belkin F5U219, P73941 manual Installation continued

Installation (continued)

Installation Procedure for Windows Me OS

This installation procedure will successfully install two USB OHCI host controllers and a single USB 2.0 enhanced host controller.

1.Locate an available PCI slot on your computer.

2.Insert the PCI Card into the slot. Apply pressure as needed until it is fully seated.

3.Insert the Belkin USB 2.0 driver installation CD into your computer’s CD-ROM drive.

4.After installing the PCI Card, turn on your computer.

5.After loading, the Windows OS will detect “NEC USB Open Host Controller (E13+)”. The required driver support will be automatically installed. No user input is required.

6.The Windows OS will detect “PCI Universal Serial Bus”. This is the USB 2.0 EHCI controller. The “Add New Hardware Wizard” window will appear.

7.Select “Automatic search for a better driver (recommended)”. Click “Next”.

10